LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1997 >> Sidekick Sport JS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Anti-Lock Brake System) >> Removal & Installation >> Rear Wheel Speed Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different variant/trim than selected.

Disconnect negative battery terminal. Raise and support vehicle. Disconnect rear speed sensor 2-pin harness connector and detach wire harness from vehicle body and rear axle. Remove harness clamp bolts, wheel speed sensor mounting bolt and rear wheel speed sensor. Ensure speed sensor is free from any metal particles. To install, reverse removal procedure. Tighten bolts to specification and check that there is no clearance between sensor and backing plate. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals