Compressor & Condenser Fan Relays
- Disconnect negative battery cable. Disconnect relay electrical connectors, and remove relay. Attach ohmmeter leads to relay terminals No. 1 and 2. Continuity should exist. Remove ohmmeter. Apply battery voltage to relay terminals No. 1 and 2. See Fig 1
.
- Attach ohmmeter leads to relay terminals No. 3 and 4. Continuity should not exist. Apply battery voltage to relay terminals No. 1 and 2. Continuity should exist with battery voltage applied. If continuity does not test as specified, replace relay.
Courtesy of SUZUKI OF AMERICA CORP.