Abs Hydraulic Solenoid Valve
WARNING: This page is about a different variant/trim than selected.
NOTE:
ABS hydraulic solenoid valves are integral components of ABS hydraulic unit.
Turn ignition off. Disconnect 6-pin ABS actuator solenoid harness connector. Measure resistance between terminals as specified. See HYDRAULIC SOLENOID TESTING table. See Fig 1 . If resistance is not as specified, replace hydraulic unit.
ABS HYDRAULIC SOLENOID TESTING
| Between Terminals | Ohms | ||
|---|---|---|---|
| 1 & 2; 3 & 4; 5 & 6 | (1) 2.9-3.2 | ||
| Each Terminal To Hydraulic Unit Body | Infinite | ||
|
|||