DTC P1530: Ignition Timing Adjustment Switch CKT Malfunction
- Locate test connector next to coolant recovery bottle. Ensure test connector terminals are not grounded or jumpered. Repair as necessary. If test connector is okay, go to next step.
- Turn ignition on. On models with manual transmission, measure voltage (backprobe) between PCM harness connector "A", terminal No. 5 (Blue/Red wire) and ground. On models with automatic transmission, measure voltage (backprobe) between PCM harness connector "A", terminal No. 16 (Blue/Red wire) and ground. If voltage is 10-14 volts, replace PCM. If voltage is not as specified, repair Blue/Red wire for short to ground. Retest system.