Clutch Pedal Position (CPP) Switch Circuit Check (M/T)

Ensure ignition is off. Disconnect harness connector at CC ECU. Turn ignition on. Using voltmeter, check voltage between ground and CC ECU harness connector terminal No. 6 (Blue wire) with clutch pedal depressed. SeeFigure . Voltage should be 10-14 volts.
If voltage is not within specification, check fuses, wiring and harness connectors. See appropriate wiring diagram under WIRING DIAGRAMS . Repair fuses, wiring or harness connectors as necessary.
If fuses, wires and harness connectors are okay, check CPP switch. See CLUTCH PEDAL POSITION (CPP) SWITCH (M/T) TEST under COMPONENT TESTS.