Interlock Cable (Sidekick & X90)
- Remove console covers. Cable is adjusted at bracket, located near gearshift. Place ignition in ACC position. Ensure cable is attached to key interlock lever.
- Loosen cable bracket nut. See Fig 1
and Fig 2
. Position release cam and insert Special Alignment Tool (09925-78210) into holes in gear selector key release cam and selector lever.
- Ensure cable is connected to key release cam and tighten cable bracket nut to 114 INCH lbs. (13 N.m). Remove special tool. Ensure key release cam moves smoothly when gear selector button is pushed.
- With selector lever in Park, turn ignition key to ACC position. Ensure when knob is released, ignition key can be turned from ACC to LOCK position. Replace components removed for service.
Courtesy of SUZUKI OF AMERICA CORP.
Courtesy of SUZUKI OF AMERICA CORP.