Activating System (Protege)

Ensure negative battery cable is disconnected. Connect passenger air bag module connector. Install right kick panel trim and scuff plate. Connect driver air bag clockspring connector. Install lower cover. Connect negative battery cable. See SYSTEM OPERATION CHECK .

Fig 1: Locating Driver Air Bag Clockspring Connectors (Miata Shown; Other Models Are Similar)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Locating Driver Air Bag Clockspring Connectors (MPV)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Locating Passenger Air Bag Clockspring Connectors (Miata Shown; Other Models Are Similar)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002