Pick-Up Coil Air Gap

WARNING: This page is about a different car, the 1997 Suzuki Swift. However, it is still accessible from the selected car via links, so may be relevant.

Remove distributor cap and rotor. Using a non-magnetic shim thickness gauge, measure air gap between reluctor tooth and pick-up coil. See PICK-UP COIL AIR GAP table. If adjustment is required, loosen pick-up coil plate hold-down screws.
Using a flat-blade screwdriver, move pick-up coil plate to adjust air gap to specification. Tighten screws and recheck air gap. Ensure no metal particles are on pick-up coil tooth.

PICK-UP COIL AIR GAP ⁽¹⁾

Application

In. (mm)

Swift

.008 (.20)

⁽¹⁾	Also referred to as Camshaft Position (CMP) sensor air gap.