Camshaft Position (CMP) Sensor

For testing procedures, see DTC P0340 in TESTS W/CODES - 1.6L article.

CAMSHAFT POSITION (CMP) SENSOR VOLTAGE ⁽¹⁾

Application

PCM Connector/Terminal No.

Approx. Volts

3-Speed A/T Or M/T

B/3 & Ground

⁽²⁾ 0-5.25

4-Speed A/T

D/3 & Ground

⁽²⁾ 0-5.25

⁽¹⁾	Measured at PCM with ignition on.

⁽²⁾	Voltage toggles from 0-1 volt to 3-5.25 volts as distributor rotor is turned slowly.