TP Sensor Adjustment
- Ensure engine is at normal operating temperature. With voltage measurement equipment still in place, ensure fast idle plunger and follower are not in contact with each other.
- Loosen TP sensor screws and rotate back and forth until 0.35-0.65 volt is obtained. Tighten TP sensor screws to 14-21 INCH lbs. (1.6-2.4 N.m).
| Application | Volts | ||||
|---|---|---|---|---|---|
| At Idle | 0.35-0.65 | ||||
| At Wide Open Throttle | 3.5-4.5 | ||||
|
|||||