Ignition Switch Test
Disconnect ignition switch harness connector. Using an ohmmeter, check continuity between switch terminals with switch in specified position. See IGNITION SWITCH CONTINUITY table. If continuity is not as specified, replace ignition switch.
IGNITION SWITCH CONTINUITY
| Switch Position | Terminal-To-Terminal (Wire Color) | ||
|---|---|---|---|
| OFF/LOCK | (1) | ||
| ACC | WHT/YEL & BLU; GRN & GRN | ||
| ON | WHT/YEL, BLU, BLK/WHT & YEL/BLK; GRN & GRN | ||
| START | WHT/YEL, BLK/WHT & BLK/YEL; BLK & BLK; GRN & GRN | ||
|
|||