Differential Exciter Ring

1. Place Special Tools (D) 09928-26010 and (E) 09913-85230, exciter ring and differential left case on press as shown.
2. Press-fit differential left case into exciter ring.

CAUTION:
- Pressure applied here should be lower than 500 kg (1102 lbs.).
- Press-fit all around differential left case evenly without tilt.
- If more than 500 kg (1102 lbs.) pressure is needed for press-fitting, it is possibly because left case is tilted. In such case, try press-fitting while correcting such tilt.





3. Check that end face of differential left case is flush with or higher than end face of exciter ring all the way around as indicated by "a" in the figure.