Left Case

1. If input oil gutter has been removed, install it with bolt applied with thread lock cement.
"A": Thread lock 1322, or equivalent.
Tightening Torque (a): 10 Nm (90 inch lbs.)





2. Install differential side L oil seal until it becomes flush with case surface by using Special Tool (A): 09913-75520, or equivalent with hammer, and then apply grease to its lip.

NOTE: Face oil seal spring side inward.

"B": SUZUKI SUPER GREASE A, or equivalent.


3. Install countershaft L bearing cup into case bore by tapping it with plastic hammer lightly.