Ignition Switch
Disconnect ignition switch harness connector. Using an ohmmeter, check continuity between switch terminals with switch in specified position. See IGNITION SWITCH CONTINUITY . If continuity is not as specified, replace ignition switch.
IGNITION SWITCH CONTINUITY
| Switch Position | Terminal-To-Terminal (Wire Color) | ||
|---|---|---|---|
| OFF/LOCK | (1) | ||
| ACC | WHT/GRN & BLU; GRN & GRN | ||
| ON | WHT/GRN, BLU, BLK/BLU & YEL/BLK; GRN & GRN | ||
| START | WHT/GRN, BLK/BLU & BLK/YEL; BLK/WHT & BLK; GRN & GRN | ||
|
|||