Shift Switch (A/T)
- Apply parking brake. Disconnect harness connector at shift switch, located on top of transaxle, just below shift cable. SeeFigure .
- Note terminal identification on shift switch. SeeFig 1 . Using ohmmeter, check for continuity between specified terminals with shift lever in specified positions. See SHIFT SWITCH SPECIFICATIONS . If continuity does not exist, adjust or replace shift switch as necessary.
SHIFT SWITCH SPECIFICATIONS
| Shift Lever Position | Continuity Between Terminals No. |
|---|---|
| Park | 5 & 6; 8 & 9 |
| Reverse | 1 & 8 |
| Neutral | 5 & 6; 8 & 10 |
| Drive | 2 & 8 |
| 2 | 3 & 8 |
| Low | 4 & 8 |