Camshaft Position (CMP) Sensor

For testing procedures, see DTC P0340 in appropriate BASIC TESTING article. Since many computer-controlled and monitored components set a Diagnostic Trouble Code (DTC) if they malfunction, also perform procedures in appropriate TESTS W/CODES article.

CAMSHAFT POSITION (CMP) SENSOR VOLTAGE ⁽¹⁾

Application

PCM Connector/Terminal No.

Approx. Volts

X-90

B/3 & Ground

⁽²⁾ 0-5.25

⁽¹⁾	Measured at PCM with ignition on.

⁽²⁾	Voltage toggles from 0-1 volt to 3-5.25 volts as distributor rotor is turned slowly.