Park/Neutral Position Switch (A/T)
NOTE:
Park/neutral position switch may also be referred to as transmission range switch.
- Apply parking brake. Disconnect electrical connector at park/neutral position switch, located on side of transmission. See Fig 1 .
- Note terminal identification on park/neutral position switch. See Fig 1 . Using ohmmeter, check for continuity between specified terminals with shift lever in specified positions. See PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS table. If proper continuity does not exist, adjust or replace switch as necessary.
PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS
| Lever Position | Continuity Between Terminals |
|---|---|
| Park | 2 & 3; 6 & 7 |
| Reverse | 6 & 8 |
| Neutral | 2 & 3; 6 & 10 |
| Drive | 6 & 9 |
| 2 | 4 & 6 |
| Low | 5 & 6 |