LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1996 >> Swift Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Controls - System/Component Tests) >> Relays & Solenoids >> Relays >> Main Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Main Relay

WARNING: This page is about a different car, the 1996 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove main relay from fuse box in engine compartment located between battery and left strut tower on left fenderwell. See Figure . Using an ohmmeter, check for continuity between terminals No. 1 and 2. See Figure .
  2. Continuity should not be present. If continuity is present, replace relay. Measure resistance between terminals No. 3 and 4. Resistance should be 70-110 ohms. If resistance is not as specified, replace relay. Apply battery voltage and ground to terminals No. 3 and 4. Continuity should now be present between terminals No. 1 and 2. If continuity is not present, replace relay.
scientia non olet · About LEMON Manuals