Tech-1A Adapter For 16 Pin Data Link Connector (DLC) (TS 016 07169(R))
Publication date: 1996-07-19Reference number: TS 016 07169(R)
Supersedes refnos: TS 016 03296
TECH-1A ADAPTER FOR 16 PIN DATA LINK CONNECTOR (DLC)
TECHNICAL SERVICE BULLETIN
Superceded Bulletin(s): TS 016 03296, Date of Issue: March 29, 1996.
TECH 1-A ADAPTER FOR 16 PIN DATA LINK CONNECTOR (DLC)
Model(s): 1995-96 Suzuki X-90, Sidekick
1996 Suzuki Esteem, Swift
Section Title: All Models
Division: Automotive
Category: Technical
Bulletin No.: TS 016 07196(R)
Date: July 19, 1996
VEHICLES AFFECTED
- All 1995-1996 production Suzuki X-90.
- December 1995 production and later Suzuki Sidekick.
- January 1996 production and later Suzuki Esteem.
- January 1996 production and later Suzuki Swift.
SERVICE INFORMATION
CAUSE
OBD II system configuration.
CORRECTION
When diagnosing the vehicles listed above, use the updated Tech-1A adapter as listed in this bulletin.
REVISION
This bulletin is to inform you of the change in the Data Link Connector (DLC) for the vehicles listed above. The pin configuration on the DLC has been modified from a 12 pin to a 16 pin connection to conform to the OBD II (On-Board Diagnostics II) system requirements. As a result of this change, a new Tech-1A adapter is now available to adapt your Tech-1A to the updated connector. If your Tech-1A needs this new adapter, please use the part numbers as listed in this bulletin.
TECH-1A PARTS SUPPLY INFORMATION
There are two versions of the Tech-lA: Version #1 (see Fig 1 ) and Version #2 (see Fig 2 ). When ordering parts for your Tech-1A, make sure that you order the correct parts for your particular version.
| Reference Number | Part Name | Part Number | Qty. |
|---|---|---|---|
| 1 See Fig 4 | 16/14 pin Adapter Cable | 09931-76030 | 1 |
| 2 See Fig 3 and Fig 4 | 14/26 pin DLC Cable | 09931-76040 | 1 |
| 3 See Fig 3 | 12/14/pin DLC Adapter | 99963-00023 | 1 |
|
NOTE:
Cable #2 is not included in the Version 1 TECH-1A kit. When connecting a Version 1 TECH-1A to a 16 pin DLC, both cables #1 and #2 will be required
|
|||