Cylinder Block Specifications

WARNING: This page is about a different variant/trim than selected.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter ⁽¹⁾

"1"

2.9531-2.9535 (75.010-75.020)

"2"

2.9528-2.9531 (75.000-75.010)

Maximum Taper

.0039 (.10)

Maximum Out-Of-Round

.0039 (.10)

Maximum Deck Warpage

.002 (.05)

⁽¹⁾	Cylinder bore diameter is determined by numerical mark ("1" or "2") stamped on cylinder block. See Figure.