LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1996 >> Sidekick JX, 2D Utility, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Anti-Lock Brake System) >> Removal & Installation >> Front Wheel Speed Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different variant/trim than selected.

Disconnect negative battery cable. Raise and support vehicle and remove wheel. Disconnect front wheel speed sensor 2-pin harness connector. Remove harness clamp bolts. Remove front wheel speed sensor retaining bolt and lift sensor from steering knuckle. To install, reverse removal procedure. Do not allow foreign material to accumulate on sensor or rotor. Tighten bolts to specification and check that there is no clearance between sensor and steering knuckle. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals