LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1996 >> Sidekick JS, 4D Utility, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Anti-Lock Brake System) >> Component Tests >> Pump Motor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pump Motor

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition off. Disconnect pump motor 2-pin harness connector. Measure resistance between pump motor terminals. Resistance should be less than one ohm at 68°F (20°C). Measure resistance between pump motor terminals and motor body. Resistance should be one megohm or more.
  2. Using jumper wires, connect positive battery voltage to harness connector terminal No. 1 (White wire) and negative battery voltage to harness connector terminal No. 2 (Black wire). Motor should operate. Replace ABS hydraulic unit if pump motor does not test as specified.
scientia non olet · About LEMON Manuals