BRAKELIGHT Switch
- Disconnect electrical connector at brakelight switch, located near top of brake pedal. SeeFigure
. Remove brakelight switch from mounting bracket. Note terminals on brakelight switch. SeeFig 1
.
- Connect ohmmeter between terminals No. 1 and 2 on brakelight switch. Continuity should exist with plunger on brake switch fully outward and no continuity should exist with plunger fully depressed.
- Remove ohmmeter. Connect ohmmeter between terminals No. 3 and 4 on brakelight switch. No continuity should exist with plunger on brake switch fully outward and continuity should exist with plunger fully depressed. Replace brakelight switch if defective.
- Reinstall brakelight switch. Adjust brakelight switch. See BRAKELIGHT SWITCH
under ADJUSTMENTS.
Courtesy of SUZUKI OF AMERICA CORP.