LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1996 >> Sidekick JS, 2D Utility, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Controls - Tests W/Codes) >> Circuit Tests >> DTC P0335 - Crankshaft Position (CKP) Sensor CKT Malfunction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0335 - Crankshaft Position (CKP) Sensor CKT Malfunction

WARNING: This page is about a different car, the 1996 Suzuki X-90. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Disconnect PCM harness connectors. Using an ohmmeter, measure resistance between PCM harness connector "B". See Figure. If resistance is 360-460 ohms, go to next step. If resistance is not as specified, go to step 3).
  2. Check CKP sensor installation and condition of teeth on crankshaft pulley. Repair as necessary. If CKP sensor and crankshaft pulley are okay, check for poor connections at PCM. Repair as necessary. If PCM connections are okay, replace PCM. Retest system.
  3. Disconnect CKP sensor harness connector. Using an ohmmeter, measure resistance between CKP sensor terminals. If resistance is 360-460 ohms, repair open in CKP sensor circuit. If resistance is not as specified, replace CKP sensor. Retest system.
scientia non olet · About LEMON Manuals