Combination Switch
WARNING: This page is about a different car, the 1996 Suzuki X-90. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect combination switch connectors. Using an ohmmeter, check continuity across switch terminals with switch in indicated position. See COMBINATION SWITCH CONTINUITY .
COMBINATION SWITCH CONTINUITY
| Switch Position | Terminal-To-Terminal (Wire Color) | |||
|---|---|---|---|---|
| Turn Signal & Hazard | ||||
| RH Turn Signal | GRN & GRN/YEL | |||
| LH Turn Signal | GRN & GRN/RED | |||
| Neutral | YEL & YEL/WHT | |||
| Dimmer & Passing | ||||
| Low Beam | RED/WHT & WHT/BLK | |||
| High Beam | RED & WHT/BLK | |||
| Passing | WHT/BLK, RED & RED/BLK | |||
| Headlights | ||||
| Parking | WHT & GRN | |||
| Lights | WHT, RED, & GRN | |||
| Off | (1) | |||
| Horn | (1) BLU/BLK | |||
|
||||