Heated Oxygen Sensor (HO2S) No. 1

HO2S No. 1 is mounted in exhaust manifold in front of catalytic converter. HO2S No. 1 produces 0.1-0.9 volt under normal operating temperatures greater than 600°F (316°C). PCM uses HO2S No. 1 voltage to determine exhaust gas oxygen concentration during engine operation. Low voltage indicates a lean exhaust mixture and a higher voltage indicates a rich exhaust mixture. HO2S No. 1 works similar to a non-heated sensor, except HO2S No. 1 is heated to operating temperatures to allow system to quickly enter closed loop operation.