LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1995 >> Swift Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Testing >> Blower Resistor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Resistor

  1. Blower resistor is mounted in front lower blower motor housing on right side of the instrument panel. Disconnect wiring harness from resistor. Terminal identification legend is molded into resistor block.
  2. Check for continuity between terminal No. 2 (MD13Pink wire) and terminal No. 4 (MD13Pink/Black  wire). Check for continuity between terminal No. 2 (MD13Pink wire) and terminal No. 3 (MD13Pink/Green  wire). Check for continuity between terminal No. 2 (MD13Pink wire) and terminal No. 1 (MD13Pink/Blue  wire). Continuity should exist in all cases. If continuity is not as specified, replace blower motor resistor.
scientia non olet · About LEMON Manuals