"D" Range Test (1.0L)
- Shift into "D" range. Hold accelerator pedal constantly at fully closed throttle position. Check 1-2 and 2-3 upshift points. See appropriate SHIFT SPEEDS table. Stop vehicle.
- If no 1-2 upshift occurs, 1-2 shift valve, 2nd brake solenoid, TCM (1995 models), PCM (1996 models) or circuit is defective.
- If no 2-3 upshift occurs, 2-3 shift valve, direct clutch solenoid, TCM (1995 models), PCM (1996 models) or circuit is defective.
- Run vehicle at 19 MPH. Release accelerator completely. After 1-2 seconds, depress accelerator pedal fully. Check if downshift occurs from 2-1. Run vehicle at 47 MPH. Release accelerator completely. After 1-2 seconds, depress accelerator pedal fully. Check if downshift occurs from 3-2.
- If no 2-1 or 3-2 downshift occurs, throttle position sensor, TCM (1995 models), PCM (1996 models) or circuit is defective.