Sensing & Diagnostic Module (SDM): Installation
WARNING: This page is about a different car, the 1996 Suzuki Swift, 1996 Pontiac Firefly, and 1996 Geo Metro. However, it is still accessible from the selected car via links, so may be relevant.
To install, position SDM in vehicle with arrow pointing toward front of vehicle. Install SDM retaining screws and torque them to 49 INCH lbs. (5.5 N.m). Connect SDM connector and re-engage CPA clip. Reinstall center console and activate the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .