LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1995 >> Swift Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Door Lock System - Automatic >> Component Testing >> Controller >> Resistance Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistance Check

  1. Remove glove box to access auto door lock controller. SeeFigure . Ensure ignition is off. Disconnect auto door lock controller harness connector. Using an analog ohmmeter, measure resistance between ground and auto door lock controller harness connector terminal No. 3. SeeFig 1 .
  2. Resistance should fluctuate between zero ohms and infinity as left front wheel is slowly turned (right front wheel locked). If resistance is not as specified, inspect vehicle speed sensor or circuit. See appropriate WIRING DIAGRAMS.
  3. Measure resistance between ground and auto door lock controller harness connector terminal No. 7. SeeFig 1 . With doors unlocked, continuity should be present. With doors locked, no continuity should be present. If continuity is not as specified, inspect door lock circuit and/or switch(s).
Fig 1: Checking Automatic Door Lock Controller Resistance
G94A46680Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals