LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1995 >> Sidekick JS, 4D Utility, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - Aw03-72LE >> Component Disassembly & Reassembly >> Rear Planetary Gear & Output Shaft >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Planetary Gear & Output Shaft: Reassembly

  1. Lubricate oil sealing rings with ATF. Install oil sealing rings on output shaft. Ensure rings rotate smoothly after installation. Lubricate and install NEW oil seal ring on output shaft. Ensure ring rotates smoothly. Apply petroleum jelly to race and install race on intermediate shaft with flat surface away from shaft.
  2. Install rear planetary ring gear on intermediate shaft. Install set ring. Install rear planetary carrier to planetary ring gear. Apply petroleum jelly to bearing and race and install on rear planetary ring gear. Install rear planetary gear assembly to output shaft. Install front planetary ring gear. See Figure .
  3. Ensure snap ring is installed in groove of output shaft. Align snap ring end with wide cutout portion of output shaft. Apply petroleum jelly to thrust washer and install on rear planetary carrier. Ensure lug shapes match cutout portions on rear planetary carrier.
scientia non olet · About LEMON Manuals