Removal & Installation
WARNING: This page is about a different car, the 1998 Suzuki Sidekick, 1997 Suzuki Sidekick, and 1996 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Raise and support vehicle and remove wheel. Disconnect front wheel speed sensor 2-pin harness connector. Remove harness clamp bolts. Remove front wheel speed sensor retaining bolt and lift sensor from steering knuckle. To install, reverse removal procedure. Do not allow foreign material to accumulate on sensor or rotor. Tighten bolts to specification and check that there is no clearance between sensor and steering knuckle. See TORQUE SPECIFICATIONS .