Bleeding Procedure
CAUTION:
DO NOT allow reservoir to run dry during brake bleeding procedure. Use only clean brake fluid. Ensure no dirt or other foreign matter contaminates brake fluid. DO NOT mix different brands of brake fluid, as they may not be compatible. DO NOT spill brake fluid on vehicle, as it may damage paint. If brake fluid contacts paint, immediately wash with water.
Raise and support vehicle. Fill master cylinder reservoir to maximum mark with clean brake fluid. Bleed brakes in sequence. See BRAKELINE BLEEDING SEQUENCE table. After bleeding brakes, depress brake pedal with a force equal to an abrupt stop. If sponginess exists, repeat bleeding procedure.
BRAKELINE BLEEDING SEQUENCE
| Application | Sequence |
|---|---|
| Sidekick | RF, LF, Proportioning Valve, LR |