Converter Housing, Oil Pump & Reverse Clutch Assembly: Reassembly

1. Place wear plate on pump and align bolt holes. Install NEW oil seal in converter housing. Place converter housing on oil pump. Loosely install bolts. Install oil pump Aligning Sleeve (09927-66010 or J-23082-01) through converter housing into pump. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
2. Install reverse clutch piston onto rear face of pump. Place springs onto piston. Install spring seat. Compress spring seat and install snap ring.

Fig 1: Checking Oil Pump Gear Clearance

Courtesy of SUZUKI OF AMERICA CORP.