Park/Neutral Position (PNP) Switch (A/T)
Disconnect negative battery cable. Disconnect connector at PNP switch on right side of transmission. Connect ohmmeter between appropriate terminals of switch connector. Refer to the PARK/NEUTRAL POSITION (PNP) SWITCH CONTINUITY table. Replace PNP switch if it does not test as described.
PARK/NEUTRAL POSITION (PNP) SWITCH CONTINUITY
| Switch Position | Terminals No. | Continuity |
|---|---|---|
| Park | 5 & 6, 8 & 9 | Yes |
| Reverse | 4 & 9 | Yes |
| Neutral | 5 & 6, 7 & 9 | Yes |
| Drive | 3 & 9 | Yes |
| Second | 2 & 9 | Yes |
| Low | 1 & 9 | Yes |