LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1995 >> Sidekick JS, 2D Utility, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL VIN [0] >> Overhaul >> Cylinder Block Assembly >> Piston & Rod Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Piston & Rod Assembly

  1. Remove cylinder head. See CYLINDER HEAD  under REMOVAL & INSTALLATION. Remove oil dipstick guide, oil pan and screen. See OIL PAN  under REMOVAL & INSTALLATION.
  2. Ensure pistons, connecting rods and rod caps are marked for reassembly reference. Remove carbon from top of cylinder bores. Remove connecting rod caps. Install protective hose over connecting rod bolts.
  3. Remove connecting rod and piston assembly through top of cylinder block. Mark cylinder number on piston crown. Remove piston rings.
  4. Remove circlips, and push piston pin out by hand.
  5. Check piston pin-to-bore fit. Pin should press in piston smoothly by hand at room temperature. When assembling, apply engine oil to outside of pin and to piston pin bore.
  6. Install circlips and piston pin. Install circlips with opening facing either up or down.
scientia non olet · About LEMON Manuals