Disabling & Activating System (Except XJS)
- Disconnect negative battery cable. Wait at least 1 minute for back-up power supply to discharge. To disable driver-side air bag module, remove driver-side air bag module and connect air bag simulator to cable reel cassette multi-plug. Driver-side air bag is now disabled.
- To disable passenger-side air bag module, remove passenger-side air bag module and connect air bag simulator to air bag module wiring harness. Passenger-side air bag module is now disabled. Reconnect negative battery cable (if necessary).
- Disconnect negative battery cable (if reconnected). Remove driver-side and passenger-side air bag simulators from air bag modules. Reconnect negative battery cable. Turn ignition on. Ensure SRS indicator light glows for about 5 seconds and then turns off.