Removal & Installation
WARNING: This page is about a different car, the 1998 Suzuki Sidekick, 1997 Suzuki Sidekick, and 1996 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Remove rear wheel(s). Remove rear wheel speed sensor. Remove rear axle shaft. Grind away a portion of sensor rotor. Using a chisel, break rotor and remove from axle shaft. To install, press new sensor rotor on axle shaft evenly. To complete installation, reverse removal procedure and press rotor onto axle shaft.