Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Install the evaporator core to the blower case assembly.
Assemble the two halves of the blower case assembly.
CAUTION: Refer to FASTENER NOTICE .
Install the screws to retain the two halves of the blower case assembly.
Tightening torque

Tighten the screws to 1.5 N.m (13 lb in).

Fig 1: Identifying Blower Motor Control Module Screws
Courtesy of SUZUKI OF AMERICA CORP.
Install the blower motor control module to the blower case assembly.
Install the blower motor control module screws to the blower case assembly.
Tightening torque

Tighten the screws to 1.5 N.m (13 lb in).

Fig 2: Identifying Blower Motor Screws
Courtesy of SUZUKI OF AMERICA CORP.
Install the blower motor to the blower case assembly.
Install the blower motor screws to the blower case assembly.
Tightening torque

Tighten the screws to 1.5 N.m (13 lb in).
Install the air inlet assembly. Refer to INSTALLATION PROCEDURE .
Install the evaporator case assembly. Refer to INSTALLATION PROCEDURE .
Install the HVAC module. Refer to INSTALLATION PROCEDURE .