Inflatable Restraint Steering Wheel Module Coil Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inflatable Restraint Steering Wheel Module Coil & Bolts

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENT REFERENCE TABLE

Callout	Component Name
CAUTION: The new SIR coil assembly will be centered. Improper alignment of the SIR coil assembly may damage the unit, causing an inflatable restraint malfunction. Preliminary Procedures Remove the steering wheel. Refer to STEERING WHEEL REPLACEMENT . Remove the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT .
1	Inflatable Restraint Steering Wheel Module Coil Bolts (Qty: 4) CAUTION: Refer to FASTENER NOTICE . Tightening torque 1.5 N.m (13 lb in).
2	Inflatable Restraint Steering Wheel Module Coil Procedure Disconnect any electrical connectors as needed. A new inflatable restraint steering wheel module coil will be equipped with a yellow tab that should be removed after the steering wheel is installed.