Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector From Crankshaft Position (CKP) Sensor

Courtesy of SUZUKI OF AMERICA CORP.

Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
If equipped with all wheel drive (AWD), remove the transfer case. Refer to REMOVAL PROCEDURE .
Disconnect the engine wiring harness electrical connector (2) from the crankshaft position (CKP) sensor.

Fig 2: Removing Crankshaft Position Sensor
Courtesy of SUZUKI OF AMERICA CORP.
Remove the crankshaft sensor bolt.
Remove the crankshaft sensor.