Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transaxle Mount Bracket Bolts (FWD) (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Position the transaxle mount bracket (2) to the transaxle.
CAUTION: Refer to FASTENER NOTICE .
Install the transaxle mount bracket bolts (3).
Tightening torque

Tighten the bolts to 55 N.m (41 lb ft) .

CAUTION: Refer to FASTENER NOTICE .
Install the transaxle mount bracket bolt (1).
Tightening torque

Tighten the bolts to 37 N.m (27 lb ft) .
Install the rear transaxle mount. Refer to INSTALLATION PROCEDURE .
Install both catalytic converters. Refer to INSTALLATION PROCEDURE and INSTALLATION PROCEDURE .