Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transaxle Mount To Bracket Nuts & Mount Bracket (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Position the transaxle mount in place between the frame and mount bracket (1).
Lower the transaxle onto the mount (3).
CAUTION: Refer to FASTENER NOTICE .
Install the transaxle mount to bracket nuts (2).
Tightening torque

Tighten the nuts to 37 N.m (27 lb ft) .
Remove the transaxle mount to frame nuts (4).
Tightening torque

Tighten the nuts to 37 N.m (27 lb ft) .
Remove the transmission stand.
Lower the vehicle.