Rear Seat Shoulder Belt Opening Bezel Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Seat No.1 Back Shoulder Belt Opening Bezel Screws & Back Release Handle

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENTS REFERENCE

Callout	Component Name
Preliminary Procedure Remove the rear center seat belt bolt. Refer to SEAT BELT REPLACEMENT - CENTER REAR .
1	Rear Seat No. 1 Back Shoulder Belt Opening Bezel Screw (Qty: 2) CAUTION: Refer to FASTENER NOTICE . Tightening torque 2 N.m (18 lb in) Tip: Lift up the seat belt to access the screws.
2	Rear Seat No. 1 Back Release Handle Tip: The bezel is integral to the rear center seat belt assembly and must be replaced as an assembly.