Wiper/Washer Switch
Disconnect wiper/washer switch. Using an ohmmeter, check continuity across switch terminals. See WIPER/WASHER SWITCH CONTINUITY .
WIPER/WASHER SWITCH CONTINUITY
| Switch Position | (1) Terminal-To-Terminal (Wire Color) | |||
|---|---|---|---|---|
| 2-Speed | ||||
| OFF | BLU & BLU/WHT | |||
| LOW Speed | YEL/BLU & BLU | |||
| HIGH Speed | YEL/BLU & BLU/RED | |||
| WASHER ON | YEL/BLU & BLK/BLU | |||
| 3-Speed | ||||
| OFF | BLU/WHT & BLU | |||
| INT | BLU/WHT & BLU; BLK & INT Relay | |||
| LOW Speed | YEL/BLU & BLU | |||
| HIGH Speed | YEL/BLU & BLU/RED | |||
| WASHER ON | YEL/BLU & BLK/BLU | |||
|
||||