Ignition Switch & Column Lock: Installation

Line up oblong hole of steering shaft with center of steering column hole. Turn ignition switch to ACC or ON position and install steering lock assembly onto column.
Turn ignition key to LOCK position and remove key. Align hub on lock with oblong hole of steering shaft and rotate shaft to ensure steering shaft is locked. See Fig 1 and Fig 2.
Install 2 NEW shear bolts. Tighten each bolt until head breaks off. Turn ignition key to ACC or ON position and rotate steering shaft, ensuring smooth movement. Check lock for proper operation.
Install steering column and steering wheel. See REMOVAL & INSTALLATION in STEERING COLUMN SWITCHES article in STEERING.

Fig 1: Aligning Column Lock & Steering Shaft

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Installing Column Lock With New Shear Bolts

Courtesy of SUZUKI OF AMERICA CORP.