Combination Switch
Disconnect combination switch connectors. Using an ohmmeter, check continuity across switch terminals with switch in indicated position. See COMBINATION SWITCH CONTINUITY .
COMBINATION SWITCH CONTINUITY
| Switch Position | Terminal-To-Terminal (Wire Color) | |||
|---|---|---|---|---|
| Turn Signal & Hazard | ||||
| RH Turn Signal | GRN & GRN/YEL; YEL & YEL/BLU | |||
| LH Turn Signal | GRN & GRN/RED; YEL & YEL/BLU | |||
| Neutral | YEL & YEL/BLU | |||
| Dimmer & Passing | ||||
| Low Beam | RED/WHT & BRN/YEL | |||
| High Beam | RED & BRN/YEL | |||
| Passing | RED & BLK | |||
| Headlights | ||||
| Parking | WHT & RED/YEL | |||
| Lights | RED/YEL, WHT, BLK & BRN/YEL | |||
| Off | (1) | |||
| Horn | (1) BLU/GRN | |||
|
||||