Throttle Pressure Control Solenoid

WARNING: This page is about a different car, the 1996 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.

Using a DVOM, measure resistance between solenoid terminals. See Fig 3. Resistance should be 3.3-3.7 ohms. Replace solenoid if resistance is not as specified.

Fig 1: Testing Shift Solenoids

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Testing TCC Solenoid

Courtesy of SUZUKI OF AMERICA CORP.

Fig 3: Testing Throttle Pressure Control Solenoid

Courtesy of SUZUKI OF AMERICA CORP.