LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Swift GS, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Testing >> Blower Resistor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Resistor

  1. Blower resistor is mounted in front lower blower motor housing. Disconnect wiring harness from resistor. Terminal identification numbers are molded into resistor block.
  2. Check for continuity between terminals "H" and "LO", between terminals "H" and "M1", and between terminals "H" and "M2". Continuity should exist. If continuity is not as specified, replace blower motor resistor.
scientia non olet · About LEMON Manuals