LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Swift GS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - EEC/MX1 >> Diagnostic Testing >> Code 24: 2ND Brake Solenoid Shorted Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code 24: 2ND Brake Solenoid Shorted Circuit

  1. Perform TCU DIAGNOSTIC CIRCUIT CHECK  . Ensure ignition is turned to LOCK position. Disconnect TCU 14-pin connector. See Figure . Using ohmmeter, measure resistance between terminal No. 6 and ground. If 10-15 ohms is present, replace TCU and retest.
  2. If 10-15 ohms is not present, disconnect solenoid harness connector. Resistance should increase to infinite measurement. If resistance is not within specification, inspect and repair short to ground.
  3. If resistance is infinite, raise and support vehicle. Remove oil pan and drain fluid. Disconnect 2nd brake solenoid harness connector. Check continuity of circuit between solenoid and harness connector, and ground. Continuity should not exist. Repair as needed. If circuit is okay, replace solenoid and retest.
scientia non olet · About LEMON Manuals